The Ripack 3000 is a quality, reliable and secure tool for higher volumes of wrapping. Its variable power of 40 – 80 kW makes it very easy to use and suitable for shrinking films down to 150 microns. Ripack reliability and safety are reflected in the design of its stainless steel heat diffuser equipped with “cold nozzle” technology.

Reliability and safety being Ripack’s watchwords, this shrink gun is equipped with patented “cold nozzle” technology, as well as a Securipack regulator. This ensures the highest level of safety and constantly monitors the pressure of the gas cylinder and the pressure of the device.

No need to go to your repairman to change the igniter! With its patent on the easy piezo change system in the handle, save time and efficiency.

• Technical description:
• Power: 40 – 80 kW
• Pressure: 2 to 4 bars
• Length/height: 360/240 mm
• Weight: 1250 g
• Sound level: <85 dbA
• Energy source: Propane or natural gas on request
• Package size (L x W x H): 460 x 330 x 140 mm
• Package weight: 4850 g

When heat-shrinking, keep the gun always perpendicular and 30 cm from the film. To shrink the film onto a pallet, allowing the film to protrude 20cm on each side. Use a CALPACK to raise your pallet and allow the film to hook off the underside and thus solidify the load. Always start by heating all the lower parts then continue by sweeping continuously in the shape of “Z”. Adjust your speed according to the thickness of the film. (See method in the video). In order to successfully weld on flat film, make sure to let a film overlap area of at least 30 cm.

The Ripack 3000 Heat Shrink Film gun is safe and easy to use. With the flame never in contact with the nozzle, it will stay cool avoiding the risk of burning. The flame spreads out to cover a larger area making the shrinking of polyethene sheeting quick and easy. The Ripack 3000 comes with a case and a regulator, 8 metres of hose, a spanner and an instruction manual.

Manual & Instructions